Zodiac ZO2255 Owner's Manual download pdf (Page 86)

SETUP

Setting various functions (Setup menu)

En 86

Subwoofer

Confirms the subwoofer.

Phase

Sets the phase of the subwoofer if the bass audio is lacking or

unclear.

Extra Bass

Allows the front channel low-frequency components to be

produced exclusively by the subwoofer, or by both the subwoofer

and the front speakers.

Bass Cross Over

Sets the lower limit of low-frequency component which is

produced from speakers of which the size is set to “Small.”

A frequency sound which is lower than the specified frequency will

be produced from the subwoofer or the front speakers. J2

Distance

Adjusts the timing at which the speakers produce audio so that

sounds from the speakers reach the listening position at the same

time.

Selecting adjustment units

Use kCursor B / C to select the unit for distance (meters or

feet), and press kENTER.

Setting distances for each speaker

Use kCursor B / C to select the speaker you want to configure,

and press kENTER. Then use kCursor D / E to set the distance

from the speaker to your listening position.

Level

Separately adjusts the volume of each speaker.

Use kCursor B / C to select the desired speaker, and press

kENTER. Then use kCursor D / E to adjust the volume for the

selected speaker.

Use (Default) Select this when subwoofer is connected. During

playback, the subwoofer will produce audio from the

LFE (low-frequency effect) channel and bass audio

from other channels. J1

None Select this when subwoofer is not connected. The

front speakers will produce audio from the LFE (low-

frequency effect) channel and bass frequency audio

from other channels.

Normal (Default) Does not change the subwoofer phase.

Reverse Reverses the subwoofer phase.

Off (Default) Depending on the size of the front speakers, either the

front speakers or the subwoofer produce the front

channel low-frequency components.

On The subwoofer and the front speakers produce the

front channel low-frequency components.

When “Subwoofer” is set to “None” or “Front” is set to “Small,”

“Extra Bass” is disabled.

40Hz 110Hz

60Hz 120Hz

80Hz (Default) 160Hz

90Hz 200Hz

100Hz

Adjustable range 1.0 ft to 80.0 ft (0.30 m to 24.0 m)

Default setting 10.0 ft (3.00 m) (Front L/Front R/Center/Surround L/

Surround R/Surround Back L/Surround Back R/Front

Presence L/Front Presence R/Subwoofer)

Adjustment

increments

0.2 ft (0.05 m)

Adjustable range -10.0 dB to +10.0 dB

Default setting 0.0 dB (Front L/Front R/Center/Surround L/Surround

R/Surround Back L/Surround Back R/Front Presence

L/Front Presence R/Subwoofer)

Adjustment

increments

0.5 dB

1 : Enabling “Extra Bass” allows both the subwoofer and the front speakers to

produce bass audio.

2 : If your subwoofer has a volume control or a crossover frequency control, set

the crossover frequency to maximum and the volume to half (or slightly less).

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 129 130

Comments to this Manuals

No comments

Zodiac ZO2255 Owner's Manual Page 86

Comments to this Manuals