Zodiac ZHP-3216-TI User Manual download pdf (Page 2)

ELECTRICAL HAZARD

• To reduce risk of electrical shock

– All electrical connections must be performed by a qualified electrician as per all applicable national, provincial, state or local

electrical codes.

– Make sure all electric power is off to pool equipment area prior to any installation or removal of Zodiac components.

– A clearly identified breaker must be installed in order to shut off electrical power to the heat pump in an emergency.

– Never open the electrical box without shutting off all power sources to the heat pump.

– If your heat pump features a water pump control option, do not forget to shut off the breaker to this water pump before servicing.

CHEMICAL USE HAZARD

• Improperly balanced water can grow bacteria and become a health concern, as well as damage your pool and its equipment.

Please have your water tested by a pool professional weekly.

• To avoid personal injury when working with pool chemicals, always wear rubber gloves and eye protection and work in a well-

ventilated area. Use caution when choosing a location to open and use chemicals as they may damage any surface in which they

come in contact.

EQUIPMENT WATER PRESSURE HAZARD

• Your pump/filter system is operated under pressure and the pressure must be released before you begin work. Please see your

pump/filter owner’s manual for further instructions.

PREVENT CHILD INJURY AND DROWNING

• To reduce the risk of injury, do not permit children to operate this product.

• Do not let anyone, especially small children, sit, step, lean, or climb on any equipment installed as part of your pool’s operational

system. Unless otherwise stated, ALL components of your pool's operational system should be located at least 3 feet from the

pool so children cannot use the equipment to gain access and be injured or drown.

WARNING

Failure to heed the following warnings can result in permanent injury, electrocution or drowning.

MANDATORY SAFETY INSTRUCTIONS

Congratulations on your purchase of a Zodiac Heat Pump! Your new heat pump from Zodiac will extend your swimming season

and provide you years of pool comfort and pleasure.

This manual will help you answer questions you may have, provide technical support, and allow you to safely enjoy your new Zodiac

Heat Pump. Please take a few moments to read through the entire manual.

IMPORTANT: YOUR HEAT PUMP MUST BE INSTALLED BY A

QUALIFIED ELECTRICIAN

READ AND FOLLOW ALL INSTRUCTIONS.

• Thermodynamical and electrical characteristics are indicated on the number plate.

• Voltage requirements for the ZHP-3216-TI, ZHP-80-TI and ZHP-65-TI heat pump are 220V – make sure you connect to a

proper electrical source.

• Make sure there are no sprinkler heads near or directed at the heat pump. Most sprinklers are connected to wells which

contain minerals, sulphur and other aggressive contaminates in the water.These contaminates can cause corrosion and affect the

heat pumps efficiency.

• Do not place any chemicals directly into the skimmer. Doing so may cause damage to the heat exchanger. Chemicals should be

poured slowly into the pool in front of the return inlet to be dispersed evenly throughout the pool.

SAVE ALL INSTRUCTIONS.

CAUTION

Failure to heed the following warnings could cause damage to pool equipment.

FAILURE TO FOLLOW INSTRUCTIONS WILL VOID YOUR WARRANTY.

ELECTRICAL WARNINGS

• Electrical installations must be performed by qualified electricians only. Installation made by unqualified persons can result in

hazards to the installer and others.

• The electrical installation must conform to the most current version of the National Electrical Code, NFPA No. 70, and all

applicable local and state codes.

WARNING

Prevent injury from electrical current.

1 2 3 4 5 6 7 ... 16 17

Comments to this Manuals

No comments

Zodiac ZHP-3216-TI User Manual Page 2

Comments to this Manuals

Related products and manuals for Heat pumps Zodiac ZHP-3216-TI