SECTION 3 – CARE & MAINTENANCE
10
vacuum
plate
Connection to a (or the) skimmer point
1 Fit the automatic flow control valve into (one of) the skimmer box using the weir
adapter. Warning: the tension of the springs on this valve is preset - do not touch!
2 Make sure there is no air in the hose of your Zodiac Genie Series II™
then connect to the valve.
3 Close all other suction points: skimmers, vacuum point. Make sure that
main drain outlet at skimmer box is closed. (if connected)
vacuum plate
2x45
0
elbows
valve
weir
adaptor
OR
Connection to a vacuum point
1 Fit the automatic flow control valve into one of the skimmers using the weir
adaptor. Warning: the tension of the springs on this valve is pre-set - do not
touch!
2 Make sure there is no air in
the hose of your Zodiac
Genie Series II™ then
connect to the valve.
3 Close all other suction
points as above.
Comments to this Manuals