Zodiac NOOSA REEF Instruction Manual download pdf (Page 15)

Hint:

Attach the spirt level to the

straight edge using pvc adhesive tape.

Materials:

- Straight wood plank

Locate the lowest point and level the ground.

You should never fill in holes. Level out bumps instead

SITE PREPARATION

LEVEL POOL AREA

Unless you have access to a surveyor’s level,

the best, most accurate way to level

the ground is with a straight

plank (100mm x

50mm will do but it

should be straight)

and a spirit level (fig 2.).

Find the lowest spot within

the pool area and level the

ground to the lowest point. Dig away

the high areas – do not fill in the low

areas .

Machine excavated sites are rarely level. It is still

necessary to hand trim to ensure that the

framework will be level.The most critical areas

are the pool perimeter and cross channels.The

pool floor should be generally level but the sand

base can be used to fill any low spots. Note: If

not level, pool wall could buckle or crease.

BE SURE: recheck the level of the entire pool area. The success of installation depends upon how well this is performed.

Once the site has been cleared and levelled it is time to start assembling the base channels and P.Posts.

IMPORTANT NOTE:

Some noxious weeds, such as onion weed can grow up through the liner material damaging your pool liner.

To guard against this we reccomend that you treat the area with a suiteable weed killer(poison). Please insure the weed killer you

use is a recognised product and will not have any detremental effects on the vinyl material used in your pool liner.

STEP 7.

FIG 2

Pool

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 63 64

No comments

Zodiac NOOSA REEF Instruction Manual Page 15