Zodiac TRI CHLORINE GENERATOR Installation Guide download pdf (Page 9)

4.6 Adjusting chlorine production

e amount of chlorine needed for your pool depends on several parameters such as the pool volume, the number

of bathers, the climate…

Chlorine production is displayed as a percentage on the screen (by 10% intervals). e water should be analysed

regularly in order to ensure an optimum level.

To adjust the chlorine production level:

Turn the TRi chlorinator on.

Use the keys to set the required production level.

WARNING: If you are using a pool covering system you should considerably

reduce chlorine production. Please use the LOW mode if this is the case.

Press the key (see ‘Low Mode’ paragraph below).

4.7 Low mode

REMARK: is function is essential if you have an indoor pool or if your pool

has a shelter, a roll-on cover or any other type of cover.

If your pool has a cover (shelter, roll-on, tarp…) you should use the ‘Low’ mode.

is is also called the ‘Winter’ mode.

is mode limits chlorine production to 10%.

Reducing production to 10% avoids having a too high concentration of chlorine

which can lead to the risk of equipment corrosion.

1/ Manual activation

1. To select the “Low” mode press is operation will reduce chlorine

production to 10%.

2. ‘LOW MODE’ will appear on the screen.

3. To stop “Low” mode press again.

NOTE: “Low” mode cannot be selected if the TRi is controlled by an external controller.

2/ Automatic activation

If your pool is equipped with an electric roll-on cover the Zodiac TRi can be connected to it. In this way the Tri

chlorinator will automatically switch to “Low” mode when the roll-on cover is on.

IMPORTANT NOTE: e automatic activation of Low mode can only be used if the roll-on cover is connected

to the TRi box and has a voltage of between 12 and 24 V dc (direct current) when it is closed.

Low

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

No comments

Zodiac TRI CHLORINE GENERATOR Installation Guide Page 9