wall and the bottom.
.
structure of the pool. Because it stretches more easliy when
NOTE: Use footwear with soft flat soles to reduce indentations in the sand.
NOTE: You will need to progressively remove each section of the top deck to hang the liner and then temporarily replace the
topdeck section.
NOTE. When filling a deepend pool, several weights (sand bags) need to be place on the liner around the 200mm ledge of
the deepend section to prevent the weight of the water pulling the liner away for the sand coving.
STEP 33.
LINER INSTALLATION
The installation process requires 2 or 3 people. Firstly lift the carton containing the liner into the centre of the pool and open the
carton. At the radius end where you are commencing to install the liner it will be necessary to remove the top decks to hang the
liner over the wall.Temporarily replace the decks as you proceed to hang the liner around the pool wall.This is very important if
you do not refit the decks as you go the wall may collapse damaging the pool wall and liner.
IMPORTANT: Do not use a knife or a sharp instrument to open the liner carton as the liner can be damaged
which is not covered under warranty.
Comments to this Manuals