Zodiac NOOSA REEF Instruction Manual download pdf (Page 42)

WALL ASSEMBLY

A C

Pool Wall Coving

STEP 31.

SPREADING AND LEVELLING THE SAND

Using a tape measure and permanent marking pen mark a line around the inside perimeter of the pool 150mm up from the

bottom edge of the wall.

b. Use the wooden screed (2m) to level the sand before rolling approx 75mm deep (50mm after rolling)

c. Build an even coving of sand around the wall of the pool approximately 200mm high + compact tightly

(150mm after compacting) up to the line around the inside perimeter of the pool.

NOTE: The coving is critical to stop the liner from going under the wall when filled with water.This will be the finished

compact level of the sand coving.

IMPORTANT SAND SHOULD BE DAMP BUT NOT WET TO COMPACT THE SAND CORRECTLY.

200 mm

150 mm

50 mm

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 63 64

No comments

Zodiac NOOSA REEF Instruction Manual Page 42